IR40
Fixed
IR40814
IR40
- Temperature range up to 1600°C
- Double Laser Pointer with real target size identification
- Onboard Emissivity Setting
- Removable terminal block or output connector
- USB interface with IR Settings Windows software
Template
Resolution
Temperature range
Use
Max head temperature
Response time
Cable
Prodotti
Template
814 - Generic
Resolution
50 to 1
Temperature range
-30°C to 1000°C
Use
Generic
Max head temperature
85°C
Response time
150ms
Cable
No
Template
160H - Metals
Resolution
300 to 1
Temperature range
385°C to 1600°C
Use
Metals
Max head temperature
85°C
Response time
10ms
Cable
No
Template
160L - Metals
Resolution
150 to 1
Temperature range
250°C to 800°C
Use
Metals
Max head temperature
85°C
Response time
10ms
Cable
No
Template
510H - Glass
Resolution
70 to 1
Temperature range
250°C to 1650°C
Use
Glass
Max head temperature
85°C
Response time
80ms
Cable
No
Template
510L - Glass
Resolution
45 to 1
Temperature range
100°C to 1200°C
Use
Glass
Max head temperature
85°C
Response time
120ms
Cable
No
Technical specifications
Temperature/measure field
From -30°C to 1600°C
Precision
±1% or ±1°C; ±(0,3%rdg or ±2°C); ±(1%rdg or ±1°C)
Repeatability
±0,5% or ±0.5°C; ±(0,1% or ±1°C)
Optical resolution
Up to 300:1
Response time
Up to 150 mS
Room temperature
Up to 85°C without cooling
Storage
From -20°C to +85°C
Spectral band
8-14μm, 1.6μm, 5.1μm
Emissivity/Transmittance
Adjustable 0.100 - 1.100
Work temperature
From -20°C to +85°C; 10-95% RH non-condensing; (50°C with laser on)
Vibrations & Shocks
IEC 68-2-6: 3G. 11-200Hz, any axis; IEC 68-2-27: 50G, 11mS, any axis
Degree of protection
IP65 (NEMA-4)
Analog output
2-wire 4-20mA on 1000 ohm loop; CR (connector): cable 3/8/15 mt
Digital output
Open collector allarme; 0-30V / 500mA; Serial 0/3V o USB optional
Power supply
5..28 V DC ( Laser 12mA@24V)
Functions
Peak, average, emissivity, alarms.
Description
The IRtech Radiamatic IR40 series is a Smart 2-wire process infrared thermometer. The instrument is powered by the loop directly on the wires of the 4-20mA analog output which is programmable on the temperature range.
A USB interface is available for direct connection to PC to read data digitally in continuous mode or set parameters. An output is also available to drive an alarm setpoint.
The advanced signal processor allows the use of functions such as averaging, peak picker, remote emissivity programming, ambient temperature compensation and many other functions.
The double laser pointer facilitates the alignment of the pyrometer by indicating the actual measurement area. The laser can be turned on directly from the keyboard or remotely with the digital interface.
The temperature of the measuring head is monitored and the laser is automatically switched off above 50°C. The emissivity can be adjusted directly on the selectors on the rear panel where the removable terminal block is located.
Blog
